BGM Elite TT280 Table Top Label Slitter Rewinder
Click Here to Download the Information Sheet
The Elite TT280 / TT400 Table Top Label Slitter rewinder was introduced into the Elite range as a low cost, high specification bench top slitter rewinder, as standard it has now been fitted with our unique cartridge rotary slitting system. The Elite TT280 label rewinder is a small compact unit that can offer flexibility and high performance at speeds of up to 180 meters per minute.
The TT280 / TT400 Table Top / Bench top Label Slitter Rewinder has a simple web path and operator friendly controls. The machine is also fitted with a fixed splice table and air web clamp to make joins on the material much easier and faster.
The TT280 / TT400 Label Slitter Rewinder has an unwind friction brake and a silicone covered nip roller drives the web through the machine. The rewinding system is fitted with a torque motor to ensure the tension is maintained throughout the finished roll and eliminates the coning effect that you see on some slitter rewinders.
The TT280 / TT400 Table Top Bench top label Slitter Rewinder is very competitively priced and makes an ideal starter label slitter rewinder.
Standard Features
Unwind
76mm / ( 3" ) Mechanical unwind mandrelUnwind tension adjustment with friction brake pad
1000 linear meter unwind diameter 406mm / ( 16" )
Fixed Splice Table
Air operated splice clampDraw Roller
Fully adjustable silicone covered nip rollerMain motor AC
Slitting System
Unique Rotary Cartridge systemLateral cartridge adjustment +/- 8mm
Datum point for ease of set up
Minimum slit width 15mm
Fully interlocked guards
Rewind system
Electronic controlled torque rewind system1000 linear meters rewind diameter 406mm / ( 16" )
Air inflation rewind shaft
Fully interchangeable rewind shaft ( quick release )
Label in - Label out facility on finished roll
Counter Facility
Label counterLinear metre counter
Programmable slow down and stop facility
Machine speed
Variable speed 180meters / min - 590 feet / minute dependant on application and substrate.CE conformity certificated
12 months parts warranty, ex works, Bradford, England
Machine Requirements
230v 13 amp single phase electric requirement80 psi - 5.5 bar air
Table Top Optional extras
Dual rewindEdge guide with ultrasonic sensor
Ink jet system
Anti static eliminator
12mm - 76mm interchangeable pneumatic rewind mandrels
12mm - 25 mm mandrel support attachment
Slitter blade set, 1 top + 1 bottom complete
Cartridge razor slitting system 6 razors included
TT bench with anti vibration mat