BGM Elite TT250D Die Cut Table Top Label Slitter Rewinder
Click Here to Download the Information Sheet
The Elite TT250D Plain label die cut slitter rewinder was introduced into our Elite range to satisfy the demand for a low cost, compact and robust machine to produce and convert plain die cut labels. The TT250D Die Cut Slitter Rewinder has been designed to accept most styles of rotary die, e.g. Focus, Nilpeter, Mark Andy, Gallus etc. The TT250D is also fitted with BGM's unique Rotary Cartridge Slitting system. Also available is a Razor Cartridge system with quick release mechanism, which enables the cartridge to be removed without disturbing the web.
The TT250D bench top Die Cut Slitter Rewinder has a mechanical unwind brake and fixed splice table with air web clamp. The web is driven through the machine using a silicone covered driven nip roller. The rewind system for the waste rewind and product rewind are independently controlled, fitted with torque motors to ensure tension is maintained throughout the finished roll. Interchangeable air inflation rewind mandrels are fitted as standard, maintaining firm individual core grip for your customers valuable product.
Standard Features
Unwind
76mm / ( 3" ) Mechanical unwind mandrelUnwind tension adjustment with friction brake pad
1000 linear metres unwind diameter 406mm / (16")
Fixed Splice Table
Air operated splice clampRotary Die Station
1/8CP 20 degree pressure angleRotometrics Fully through core hardened anvil
Waste rewind independently driven ensuring outstanding matrix stripping with fully adjustable tension control
76mm - 3" mechanical waste rewind mandrel
Draw roller
Air operated nip roller impression on / offGear driven nip roller
Main motor 1.5 kw AC
Slitting System
Unique Rotary Cartridge systemLateral cartridge adjustment +/- 8mm from datum point
Datum point for ease of set up
Minimum slit width 15mm
Fully interlocked guards
Rewind system
Electronic controlled torque rewind system1000 linear metres rewind diameter 406mm / (16")
Air inflation rewind shaft
Fully interchangeable rewind shaft ( quick release )
Label in - Label out facility on finished roll
Counter Facility
Label counterLinear metre counter
Programmable slow down and stop facility
Machine speed
Variable speed 165 metres / min - 543 feet / minute dependant on application and substrate.CE conformity certificated
12 months parts warranty, ex works, Bradford, England
Machine Requirements
230v 13 amp single phase electric requirement80 psi - 5.5 bar air
Table Top Optional extras
Dual rewindAdditional Rotary Die Station
Edge guide with ultrasonic sensor
Ink jet system
12mm - 76mm interchangeable pneumatic rewind mandrels
12mm - 25 mm mandrel support attachment
Slitter blade set, 1 top + 1 bottom complete
Cartridge razor slitting system 6 razors included
Additional die adaptors
Rotometrics hydrojacks
TT bench with anti vibration mat